1. | Wash hands with soap and put on disposable gloves and apron |
2. | Prepare the solution at the required temperature |
3. | Attach the tubing and the rectal tube with tunnel , pour the solution in it and check for leakage |
4. | Lubricate the tip of rectal tube about 4 inches |
5. | Fill the tunnel with the solution and expel air from the funnel , allowing a small amount of fluid to run into kidney tray. Pinch the tray |
6. | Separate the patients buttocks to visualize the anus clearly and insert the tip about 4 inches while patient exhales |
7. | Lower the funnel below the level of rectum |
8. | Raise the funnel and allow the fluid to run in continue to pour more fluid into the funnel before funnel is empty |
9. | When 200 to 300 ml of fluid has gone in pinch the tube before the funnel is completely empty and invert it over the bucket and syphon off the fluid |
10. | When the return flow ceases turns the funnel upright and pours more solution . Lower the funnel until air from the tube has been expelled . then raise the funnel a nd repeat the fluid to run in, continue to pour more fluid in funnel before funnel is empty |
11. | Continue the procedure until all the fluid ordered has been given or till the return of flow is clear |
12. | Temporarily stop the procedure if the patient develops any discomfort |
13. | Gently remove the rectal tube by pulling through 3-4 layers of rag pieces or gauze pieces |
14. | Discard the rag pieces in paper bag , pace funnel with the tubing in kidney tray |
Post Top Ad
Your Ad Spot
Sunday, 14 January 2018
Subscribe to:
Post Comments (Atom)
Post Top Ad
Your Ad Spot
No comments:
Post a Comment